All Issue

2019 Vol.12, Issue 3 Preview Page

September 2019. pp. 59-67
Abstract


References
1 

Ahn, C. S., Yoon, S.W., and Chin, S.Y. (2012). Diligence and Indolence Management System for Specialty Contractor on Construction Site Using GPS of Smart Phone. Korean Journal of Construction Engineering and Management. 13(3): 56-66.

10.6106/KJCEM.2012.13.3.056
2 

Carter, G. and Smith, S. (2006). Safety Hazard Identification on Construction Project. Journal of Construction Engineering and Management. 132(2): 197-205.

10.1061/(ASCE)0733-9364(2006)132:2(197)
3 

Han, S. T. (2017). A Study on the Improvement of Safety Manegement by the Cause of Accident in Construction Sites. Master's thesis. Seoul National University of Science and Technology. Korea.

4 

Hong, J. S., Bae, D. K., and Kim, J. J. (2005). A Safety Management Activity Improvement in Construction Sites through Analysis of Success Factors. Korean Journal of Construction Engineering and Management. 6(5): 148-156.

5 

Jang, Y. R. and Go, S. S. (2018). A Risk Assessment Counterplan for Reducing the Accident Rates in Medium and Small sized Construction Sites. Korean Journal of Construction Engineering and Management. 9(5): 90-100.

6 

Kim, D. W. (2011). Safety Management System for a Large Construction Project Using Real-time Location System. Ph. D. Dissertation. Korea University. Korea.

7 

Kim, Y. S. (2014). A Study on the Improvement of Construction Scaffolds Considering Structual Stability and Size of Workers. Master's thesis. Hanyang University. Korea.

8 

Ko, D. W. and Jang, M. H. (2014). Development of Adjustable Safety Foothold for Scaffoldings. Journal of the Regional Association of Architectural Institute of Korea. 16(5): 191-198.

9 

Lee, H. S., Lee, K. P., Park, M. S., Kim, H. S., and Lee, S. B. (2009). A Construction Safety Management System Based on Building Information Modeling and Real-time Loading System. Korean Journal of Construction Engineering and Management. 10(6): 135-145.

10 

Lee, Y. S., Lee, D. G. Yu, Y. G., and Lee, H. J. (2016). Application of Drone in Forest Damage Areas. Journal of Korean Society for Geospatial Information Science. 24(3): 49-58.

10.7319/kogsis.2016.24.3.049
11 

Ministry of Employment and Labor. (2018). Analysis of the Status of Industrial Accidents. Korea

12 

Moon, S. W., Choi, E. G., and Hyun, J. H. (2011). Safety Management of the Retaining Wall Using USN Sonar Sensors. Korean Journal of Construction Engineering and Management. 12(6): 22-30.

10.6106/KJCEM.2011.12.6.22
13 

Paik, S. M. (2014). A Study on the Improvement of Construction Safety Management System Using the Internet of Things. Master's thesis. Gacheon University. Korea

14 

Samir E. and Osama M. (2008). Intergrating 3D Laser Scanning and Photogrammetry for Progress Measurement of Construction Work. Automation in Construction. 18: 1-9.

10.1016/j.autcon.2008.05.006
15 

Shin, H. S., Um, J. S., and Kim, J. H. (2017). A Study on Damage Scale Tacking Technique for Debris Flow Occurrence Section Using Drone Image. Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography. 35(6): 517-526.

Information
  • Publisher :Korean Society of Disaster and Security
  • Publisher(Ko) :한국방재안전학회
  • Journal Title :Journal of Korean Society of Disaster and Security
  • Journal Title(Ko) :한국방재안전학회 논문집
  • Volume : 12
  • No :3
  • Pages :59-67
  • Received Date :2019. 08. 09
  • Revised Date :2019. 08. 27
  • Accepted Date : 2019. 09. 04